AAC $9.95 ACHR $3.30 +0.76% ▲ AERO $16.37 -0.24% ▼ AIN $64.68 -1.10% ▼ AIR $105.11 -0.36% ▼ AM $20.17 -0.54% ▼ AMP $496.30 -1.14% ▼ AMTM $20.94 +0.10% ▲ APH $76.89 +1.04% ▲ ASB $29.66 -1.98% ▼ ATI $180.71 -0.09% ▼ ATRO $59.12 +0.42% ▲ AVAV $99.31 -3.11% ▼ AVNW $16.63 +1.03% ▲ AXON $317.24 +5.01% ▲ BAB $25.64 +0.08% ▲ BAH $82.40 -1.96% ▼ BBAI $1.79 +1.41% ▲ BDL $52.20 -2.06% ▼ BELFB $224.56 -0.48% ▼ BHE $62.10 +0.10% ▲ BKSY $19.49 -5.30% ▼ BWXT $117.76 -0.65% ▼ CACI $601.47 -1.29% ▼ CAE $27.44 -0.58% ▼ CDRE $30.73 -3.67% ▼ CICN $0.00 CMTL $1.07 -2.73% ▼ CNC $64.56 -5.06% ▼ CODA $7.90 -0.88% ▼ AAC $9.95 ACHR $3.30 +0.76% ▲ AERO $16.37 -0.24% ▼ AIN $64.68 -1.10% ▼ AIR $105.11 -0.36% ▼ AM $20.17 -0.54% ▼ AMP $496.30 -1.14% ▼ AMTM $20.94 +0.10% ▲ APH $76.89 +1.04% ▲ ASB $29.66 -1.98% ▼ ATI $180.71 -0.09% ▼ ATRO $59.12 +0.42% ▲ AVAV $99.31 -3.11% ▼ AVNW $16.63 +1.03% ▲ AXON $317.24 +5.01% ▲ BAB $25.64 +0.08% ▲ BAH $82.40 -1.96% ▼ BBAI $1.79 +1.41% ▲ BDL $52.20 -2.06% ▼ BELFB $224.56 -0.48% ▼ BHE $62.10 +0.10% ▲ BKSY $19.49 -5.30% ▼ BWXT $117.76 -0.65% ▼ CACI $601.47 -1.29% ▼ CAE $27.44 -0.58% ▼ CDRE $30.73 -3.67% ▼ CICN $0.00 CMTL $1.07 -2.73% ▼ CNC $64.56 -5.06% ▼ CODA $7.90 -0.88% ▼

Airbus advances towards Wing of Tomorrow flight-test phase

November 18, 2026 · by DPW Pipeline

Airframer plans to evaluate multiple wing-tip extensions to inform design of Next Generation Single-Aisle.
Airbus has begun fabricating the first set of wing extensions it plans to flight test under its Wing of Tomorrow programme.

Designed to simulate fully extended folding wing-tips, they are part of the airframer’s strategy to develop ultra-efficient high-aspect-ratio wings for the Next Generation Single-Aisle (NGSA), an eventual successor to the A320neo family.

Airbus announced the wing-tip project in July, and Sue Partridge, head of Wing of Tomorrow, says so far it is “going really well”.

The airframer has already performed “a lot of work to prepare the test aircraft” for the installation – the wing-tips will replace the jet’s current ‘Sharklet’ structures – with design work on the multiple extensions also under way.

“We are very well advanced through the design of the extensions and we have already started the manufacture of the first extensions,” she told FlightGlobal at the UK Aerospace Technology Institute conference in South Wales on 17 November.

The extensions will be installed on the test aircraft in 2027, with a first flight to follow later that year.

Partridge says Airbus will test a “number of different iterations” of the wing-extensions – which simulate the folding tips in their ‘locked’ position – over the course of the flight-test campaign.

These feature different shapes, configurations and sub-configurations, she notes.

“It’s not an endless number because I haven’t got an endless amount of money but we are doing some different core shapes, but then we are looking at different iterations within that.”

Airbus has not set a limit on the number of flights it will perform with each iteration of wing-tip extensions but will continue “until we conclude all the learning that we want to get from that flight-test programme”.

Partridge hopes the flight-tests will be wrapped up in 2027 but says there is an option to continue into 2028 if required.

She declines to disclose how long each structure will be but says they are “in line” with the longer wing envisaged for the NGSA, broadening the A320neo’s 34m (112ft) span by around 4-5m on each side.

Load testing ongoing

Meanwhile, load testing of a full-scale 17m-long demonstrator produced through Wing of Tomorrow continues at the airframer’s Aerospace Integrated Research & Test Centre site in Filton, near Bristol in southwest England.

This process, culminating in the testing-to-destruction of the wing, was meant to conclude later this year.

However, Partridge says the project’s destructive conclusion has been pushed back: “Having invested an awful lot in that asset, we are going to squeeze every bit of learning out of it.

“It’s back in testing right now, running load cases, and that will go on well into next year.”

Results to date have been “encouraging”, she says, and are “validating our predictions”.

Another two wing demonstrators were built as part of the programme, with the third, the ‘run-at-rate’ wing, completed earlier this year.

This demonstrator is designed to evaluate whether the all-composite structure can be built at a pace that could support the high rates envisaged for the NGSA and what place automation has in the process.

Partridge says it has “taught us a lot about the automation bricks we were trialling”.

“As ever with technology programmes, some of these automation technologies worked really well and fulfilled their potential. Others didn’t.

“Where they didn’t, potentially we have now decided that’s a manual process,” she says.

“We have now made some choices but we have also, in certain areas, decided to continue further work on the technology,” she says, where “we still think we should make this work”.

Additional demonstrators planned

As a further extension of Wing of Tomorrow, Airbus is also the lead on a pair of projects funded by the UK’s Aerospace Technology Institute (ATI) that will also result in the construction of additional large-scale demonstrators.

Projects AVIATION 1 and 2 – advanced wings enabling ultra-efficient propulsion – are “about the next phase of demonstration, looking at more ambitious wing architectures and the integration of different engine options”, says Partridge.

Although the integration of specific engines will not be studied as part of the project, “we need to make sure that we have done enough work to enable any of those [powerplant] options to be integrated,” she notes.

Physical demonstrators, backed by digital modelling, are planned under the project, to both “learn and capture the learning” and “to onboard the supply chain and bring them on the journey with us”.

Elsewhere, Airbus UpNext, the airframer’s in-house technology accelerator, is developing a biomimicking wing capable of changing shape in flight.

Called the eXtra-performance wing, the structure is being installed on a modified Cessna business jet in Cazaux in southern France.

A remotely piloted first flight is planned for the first half of 2027, a slight delay over the previous end-2026 target.

The post Airbus advances towards Wing of Tomorrow flight-test phase first appeared on FlightGlobal.

Source: www.flightglobal.com — article syndicated from the publisher’s feed; all rights remain with the original publisher.