More clarity emerges on Rolls-Royce’s £2.5bn UltraFan development plan
Propulsion specialist eyes trio of test engines to derisk development of next-generation narrowbody powerplant.
Further details have emerged about how Rolls-Royce intends to deploy £2.5 billion ($3.2 billion) of public-private funding to develop technologies “underpinning” its UltraFan 30 engine and ultimately re-enter the narrowbody market.
The UK propulsion specialist has a longstanding goal to return to the single-aisle segment it vacated in 2012 when it exited the International Aero Engines consortium.
Rolls-Royce had already been promoting a scaled down version of the UltraFan geared-turbofan architecture, including plans for a demonstrator engine, as its route back into the narrowbody market.
But its ambition was significantly bolstered on 28 October when the UK government threw its weight behind the effort, announcing a 10-year £2.5 billion jointly funded research and technology programme focused on next-generation gas turbine technology, including potentially for military applications.
Although details remain scarce and the framework agreement has yet to be finalised, multiple speakers at the Aerospace Technology Institute’s conference – both in public sessions and on the sidelines – offered some clarity on the overall direction of the project.
Simon Burr, Rolls-Royce group director of engineering, quality and safety, sees the partnership with the government as critical.
“When you are betting on a market that’s 10 years out that the government and governments internationally regulate, you want to know the government is in partnership with you,” he says.
Demonstrator plan
Rolls-Royce aims to run the narrowbody-sized engine demonstrator in 2028.
“We are well on our way – there are lots of parts in manufacturing,” says Burr.
He describes the design process is “well advanced” following a concept design review completed in June: “It’s not a pipe dream to get to where we want to be in the latter part of 2028.”
The demonstrator engine will marry a new low-pressure system and narrowbody-scaled gearbox to “a proven core” taken from the Pearl 10X business jet engine, the newest and most powerful in the Pearl family.
That smaller power gearbox is built and “about to go to test” at its dedicated facility at Dahlewitz in Germany, says Burr.
An additional test vehicle, also built around the Pearl powerplant, will be used to demonstrate other technologies, notably a hybrid-electric system.
A Pearl 10X business jet engine’s core will be used for the UltraFan 30 demonstrator. Source: Rolls-Royce
Much funding for the hybridisation effort will be drawn from the EU’s Clean Aviation ELEVATED programme, which should – subject to grant approval – kick off in the new year.
But Burr says a third test vehicle is also under consideration “to see how we will evolve the core.
“A business jet engine is not a perfect match for what we want. The core will be slightly bigger and slightly different in a few ways,” he says.
Although retaining the Pearl’s two-spool architecture, there will be changes related to materials technology and advanced coatings, as well to certain components, such as blisks used in the business jet engine’s compressor stages.
“We want to demonstrate all those things, but the key challenge is derisking the low-pressure system,” he adds.
Larger UltraFan back on test
In the meantime, Rolls-Royce is readying to begin a second round of testing on the original widebody-sized UltraFan demonstrator, building on the 70h of run time it accumulated in 2023.
Burr says the powerplant has been rebuilt and is “about to run again”, likely before the Christmas break, albeit the Testbed 80 facility required for the campaign is currently occupied by a Trent XWB-97 being evaluated for a latest durability enhancement package.
Running the larger UltraFan demonstrator will generate valuable data for its smaller sister powerplant, he adds. “We are not just running it because we want to run it – we want it to inform the design of the [smaller] UltraFan engine.”
Rolls-Royce is branding the single-aisle variant as the UltraFan 30 in reference to its broad thrust class of around 30,000lbf (133kN).
Burr says the size of the fan on the eventual product will ultimately be determined by the thrust requirements of the airframers, but will be around 85in (2.15m) “plus or minus”, potentially rising to 90cm.
However, the demonstrator’s fan will be “a bit smaller” as there “not as much energy in the core”.
Manufacturing strategy
Alan Newby, Rolls-Royce director of research and technology, says that based on timelines disclosed by the airframers, particularly Airbus, for their next-generation single-aisles, “We have got to be ready with the technology” by the end of the decade.
In addition to meeting performance and durability goals, Rolls-Royce must also prove “that we can produce it at rate”, says Burr. “We are trying to re-invent the way we put engines together and that will require new facilities.”
Capital investment in future factories is not covered by the £2.5 billion project, although the “underpinning” manufacturing technologies are. Nonetheless, the airframers will want to know “where are we going to build this thing, so we have got to start thinking about that”, says Newby.
In particular, being able to meet the rate expectations – potentially requiring hundreds of engines per month – will be a key hurdle to overcome, says Ben Saunders, chief of technology for manufacturing and materials, Rolls-Royce.
“Moving into a single-aisle market presents a different challenge,” he says.
Saunders points out that Rolls-Royce “will have to deliver every single day” as many engines as it ships weekly in the widebody market.
A high degree of automation will also be key “to ensure a viable single-aisle product for us”, he says.
Through its Wing of Tomorrow programme, Airbus in the UK has been investigating technologies that could be incorporated on a next-generation narrowbody wing, including the ability to build those structures at high rates.
Saunders believes a similar initiative is needed on the engine side.
“If we want to win a position for a propulsion system [on a future narrowbody] we need to have the propulsion equivalent of that Wing of Tomorrow facility to prove that we can really build the product at the rate required,” he says.
Funding routes
No details have yet been disclosed on how the £1.25 billion promised by the government will be delivered, although the ATI believes it will be responsible for most, if not all the public funding.
And although it is to be spread across 10 years, FlightGlobal understands the engine maker hopes it will be “front-loaded” to cope with the heavy investment in research and technology needed at the start of the programme.
With such a huge figure being doled out by the government to the aerospace sector, there have been concerns that the wider ATI budget could be trimmed as a result.
But Paul Adams, the ATI’s chief innovation officer
Source: www.flightglobal.com — article syndicated from the publisher’s feed; all rights remain with the original publisher.